T-Motor Pro II HD Stack - F7 FC + 55A 3-6S AM32 4-in-1 ESC - 30x30
RDQ
manufacturer
Diatone
RDQ
Built-in ESC
—
55 A
Current Sensor
true
true
Digital VTx
—
DJI
Dimensions
—
37x37 mm
ESC Protocols
DShot600,DShot300,DShot150
DShot150,DShot300,DShot600,DShot1200
Firmware
Betaflight
Betaflight
Flash Storage
—
128 MB
GPS Port
true
—
Gyroscope
BMI270
BMI270
Gyro Rate
8 kHz
—
Input Voltage
—
3-6S
All-in-One
false
false
MCU
STM32F722
STMF722RET6
Motor Outputs
—
4
Mounting
30x30
30.5x30.5
OSD
true
true
UARTs
6
—
Weight
—
17.3 g
Frequently Asked Questions
Which is better, the MAMBA MK4 F722 Flight Controller 30mm/M3 or the T-Motor Pro II HD Stack - F7 FC + 55A 3-6S AM32 4-in-1 ESC - 30x30?+−
Both are capable flight controllers options. The best choice depends on your specific build requirements. Review the spec differences above to find which suits your needs — consider weight, power output, mounting compatibility, and price.
What is the difference between the MAMBA MK4 F722 Flight Controller 30mm/M3 and T-Motor Pro II HD Stack - F7 FC + 55A 3-6S AM32 4-in-1 ESC - 30x30?+−
The MAMBA MK4 F722 Flight Controller 30mm/M3 is made by Diatone and the T-Motor Pro II HD Stack - F7 FC + 55A 3-6S AM32 4-in-1 ESC - 30x30 is made by RDQ. There are 3 spec differences between them — see the full comparison table above for details.
Are the MAMBA MK4 F722 Flight Controller 30mm/M3 and T-Motor Pro II HD Stack - F7 FC + 55A 3-6S AM32 4-in-1 ESC - 30x30 compatible with the same drone builds?+−
Both the MAMBA MK4 F722 Flight Controller 30mm/M3 and T-Motor Pro II HD Stack - F7 FC + 55A 3-6S AM32 4-in-1 ESC - 30x30 are in the Flight Controllers category and are broadly compatible with similar drone builds. Always verify mounting patterns, voltage requirements, and firmware support for your specific frame and flight controller.
